Biological Solution
• Removing scale
safely and effectively is one of the most difficult
processes (yet most important) for a non-professional
to complete successfully. We developed this unique and
proprietary blend application to speedily remove mineral
deposits without excessively increasing corrosion rates,
unlike mineral acid based de-scaling compounds.
•This product contains specific and strong corrosion
control agents for ferrous and non-ferrous metals that
work side by side with the scale removal agents providing
your system with protection as it de-scales the metal
heat transfer surfaces.
•You will not find a more user friendly de-scaling
product.
•All systems will collect some deposits over time
so a light application (5-10%) periodically is good
insurance that you will not experience severe scaling
and its related problems. The degree and speed at which
scale deposition will develop is entirely dependent
on the quality of the water you fill your boiler with.
•Good quality resin-softened water may need a
touch up with Scale-Out only once every 4+ years while
water which is chronically wrecking hot water heaters
and plugging faucet screens in your house may need more
frequent use of Scale-Out. Be preventative in regards
to scale because once your outdoor wood boiler is noticeably
scaled you will have a situation that will need immediate
and possibly costly attention.
•It is highly recommended that a system that has
been in use and has not been chemically treated previously
be de-scaled completely before starting Treatment Solution
101™ or any treatment for that matter. •Excessive
scale will reduce the effectiveness of all chemical
water treatment program products.
•Scaling and the resultant corrosion under the
scale is the #1 problem affecting the efficiency and
longevity of your outdoor wood boiler investment. Scale
will destroy your system metals and decrease it’s
ability to efficiently produce heat.
•Shelf life of 2 years
Dosage: 5-25 % of total
system water capacity depending on severity (amount
and type) of scale deposition
Directions for use: Allow space (volume)
for the addition of Scale-Out Solution 115™ to
your system by draining an appropriate portion of your
system water. Add Scale-Out Solution 115™ directly
to your system. Circulate and fire your system, warming
the water to aid product effectiveness. Foaming, an
increase in turbidity, and a rise in pH are good indicators
that active scale removal is occurring. When the system
pH reaches 7 to 8 on a Wood Boiler Solutions approved
pH test add more Scale-Out Solution 115™ to continue
cleaning. Repeat if necessary until the system pH stabilizes
below a pH of 7 for a period of at least 2-3 hours and
then drain and thoroughly flush the
system with repeated fresh water adds. System
must then be treated per instructions with Prep Solution
102™ followed by Treatment Solution 101™.
 Back
To Top
|
