Look At How Easy A HS-Tarm Multi-Heat Stoker
Boiler Is To Operate
Starting the boiler: Feed wood pellet
fuel into the combustion chamber using the auger
feed button (approx 5-6 handfuls). If you are using
corn, add a few handfuls of wood pellets to the
corn for easier igniting of the corn. Ignite the
fuel using a fuel starter such as woodchips impregnated
with wax.
When the fuel is well ignited (about
5 Minutes). You are now ready to turn on the boiler.
Operation: Now let the Multi-Heat’s
controls do the rest. The boiler will operate between
Hi, Lo, and Standby Mode to maintain the boiler’s
set-point.
Maintenance: The only required maintenance
is filling the easy access large hopper in the rear
of the boiler and...
