The Peerless® Partner® Lo-Boy indirect-fired
water heater provides a true advancement in hot
water generation. By utilizing the existing boiler
as its heat source, the burner fires only when necessary
and transfers heat energy through a highly efficient
cupronickel, fin-tube heat exchanger. The heater
functions as a separate heating zone and water movement
is regulated from the boiler through the heater
coil by a separate circulator or zone valve.
The modern coil design of the Peerless Partner
indirect-fired water heater provides maximum heat
transfer efficiency and resists mineral buildup
that discolors water. Old style coils can produce
discolored tapwater that affects taste and leaves
blue bathtub rings. The heater’s cupronickel
heat exchanger is highly resistant to any scaling
deposits and is positioned so entering water provides
scrubbing action, eliminating the need for chemical
cleanings.
The domestic hot water is stored in a high-grade
316L stainless steel tank. Two inch foam insulation
keeps the water hot with a standby loss of less
than 1/2° F per hour. This allows the boiler
to stay off most of the day and night. The result
is more hot water with reduced boiler water temperatures
and drastically reduced standby losses.
The Peerless Partner indirect-fired water heater
has two or more times the recovery rate of gas-fired
water heaters and supplies as much as five times
the amount of hot water as a comparably sized electric
water heater.
This heater is an ideal replacement for existing
water heaters. It can also be used for new applications.
A vent or stack is not required. The tank’s
light weight makes it very easy to position. The
plastic jacketing is maintenance free and does not
scratch or rust.
The Peerless Partner indirect-fired water heater
comes equipped with an adjustable, well-type Honeywell
control and a T&P relief valve as standard equipment.
|
